Amtec PRO 3060 Bond Coat Low Temperature Spray Powder

Amtec PRO 3060 is a special, “inert gas atomized” nickel base powder having Chromium, Molybdenum and Silicon elements added for superior corrosion resistance and also resistance to scratching and high temperature. It is a build-up powder to be used over the initial PRO 3000 Bond Coat. It can easily bond to the initial bond coat and designed for build-up where a corrosion resistant mirror finish is required or desired. The metallurgical structure of this powder makes it the best for thin, smooth and pore-free overlays. It is excellent for a final layer on cylindrical surfaces that require a fine finish. The particle size distribution in the powder is designed to eliminate excessive fuming during the spraying process. It is a prime powder for building up where a 316L like deposit is required. Amtec PRO 3060 machines easily and finishes to a high polished surface.

Download the product information .pdf for more details.

Amtec PRO 3055 Bond Coat Low Temperature Spray Powder

Amtec PRO 3055 is a special “inert gas atomized” nickel base powder having Chromium, Boron and Silicon elements added for hard wear resistance and also resistance to cavitation. It is a build-up powder to be used over the initial PRO 3000 Bond Coat. It can easily bond to the initial bond coat and designed for build-up where a hard surface is required or desired. The metallurgical structure of this powder makes it the best for hard overlays. It is excellent for build-up on cylindrical surfaces that are subject to abrasion. The particle size distribution in the powder is designed to eliminate excessive fuming during the spraying process. It is a prime powder for building up of worn areas that are subject to severe wear. Amtec PRO 3055 finishes by dry grinding using a tool-post grinder.

Download the product information .pdf for more details.

Amtec PRO 3038 Bond Coat Low Temperature Spray Powder

Amtec PRO 3038 is a special “inert gas atomized” inconel® powder used as a build-up over the initial PRO 3000 Bond Coat. It can easily bond to the initial bond coat and is a general purpose, build-up powder that has good resistance to oxidation and has excellent wear resistance and very low shrinkage. The particle size distribution in the powder is designed to eliminate fuming during the spraying process. It can be used as an all around coating where both wear and corrosion are problems. It is a prime powder for building up of extremely worn areas, and has excellent machinability.

Download the product information .pdf for more details.

Amtec PRO 3028 Bond Coat Low Temperature Spray Powder

Amtec PRO 3028 is a special “inert gas atomized” aluminum bronze powder used as a build-up over the initial PRO 3000 Bond Coat. It can easily bond to the initial bond coat and designed for build-up where a bronze finish is required or desired. The metallurgical structure of this powder makes it the best for heavy build-up, virtually unlimited. PRO 3028 has excellent wear resistance, resists wear by fretting, and also makes an excellent coating for soft bearing surfaces. The particle size distribution in the powder is designed to eliminate excessive fuming during the spraying process. It is a prime powder for building up of extremely worn areas, and has excellent machinability and toughness. Amtec PRO 3028 is the most forgiving of the low temperature spray powders, and is also the most popular build-up powder. It finishes extremely well and can also be sprayed on metal to create an antique look for decorative purposes.

Download the product information .pdf for more details.

Amtec PRO 3000 Bond Coat Low Temperature Spray Powder

Amtec PRO 3000 Bond Coat is a special “inert gas atomized” powder used as a preliminary coating of 0.005” to 0.010” thickness, applied before putting on a finish coating. It can easily bond to clean oxide-free smooth surfaces, giving a bonding strength of over 3000 PSI. Higher bond strengths are obtained on surfaces that are blast cleaned with angular grit, or machined down with a threaded undercut. The bonded coating of PRO 3000 is left in the as-sprayed condition to facilitate bonding of the finishing coat of the selected build-up powder. The particle size distribution in the powder is designed to eliminate fuming during the spraying process.

Download the product information .pdf for more details.