Amtec 3 Cast Iron MIG

Amtec 2 Cast Iron MIG is a solid bare wire whose properties are of a full nickel metallurgical structure. It is designed for use on ductile, malleable and grey cast irons in all positions where easily machined welds are required. The wire may be used with the MIG process utilizing the spray, pulsed-arc or short-arc methods. Reverse Polarity with Constant Voltage is required for MIG applications. Argon/CO2 (75/25) should be used for MIG applications. This product produces ductile welds, while maintaining high machinability.

Download the product information .pdf for more details.

Amtec 2 Cast Iron MIG

Amtec 2 Cast Iron MIG is a solid bare wire whose properties are of a unique nickel-iron-manganese metallurgical structure. It is designed for use on ductile, malleable and grey cast irons in all positions and at high deposition rates of up to 18 lbs. per hour. The wire may be used with the MIG process utilizing the spray, pulsed arc, or short-arc methods. Reverse Polarity with Constant Voltage is required for MIG applications. Argon/CO2 (75/25) should be used for MIG applications. This product produces high strength and ductile welds, while maintaining machinability and color-match.

Download the product information .pdf for more details.

Amtec 133 Cast Iron AC/DC Reverse Electrode

A full nickel core wire electrode with a new and improved non-conductive coating for welding cast iron. This electrode is designed to operate in all positions, and is manufactured in such a way that the cost is less than other types of electrodes, but the running characteristics and welding performances remain superior. The deposit is machinable, and the electrode has a performance like the nickel-ferrous type electrodes, giving more penetration than most straight polarity, full nickel electrodes. With the non-conductive coating, this electrode can be used in tight positions without side arcing.

Download the product information .pdf for more details.

Amtec 122 Cast Iron AC/DC Reverse Electrode

A nickel-iron type core wire, with an extruded coating,makes this cast iron electrode good for all position welding of most cast irons. This electrode produces more joining strength than the full nickel electrodes, but will not give as machinable a deposit as the full nickel electrodes, such as Amtec 3 and Amtec 133. It is designed for low cost repair on cast iron.

Download the product information .pdf for more details.