Amtec AS 406 Aluminum

Amtec AS 406 Aluminum Solder

Amtec AS 406 is an economical low melting, self fluxing alloy for brazing aluminum and zinc based metals (white metal, zinc die cast, pewter, pot metal). AS 406 produces a sound joint, that is stronger than the parent metal, and is porosity free, clean and free from slag. Used to braze aluminum without flux, and can be used on galvanized steel to replace the galvanizing if it has been worn or burned off.

Download the product information .pdf for more details.

Amtec 1028 FC Yellow Brass

Amtec 1028 FC Yellow Brass Brazing

Amtec 1028 FC is a triple deoxidized bronze brazing alloy with a moisture sealed flux coating. It eliminates the harsh chemical odors and normal glare of conventional type products. The smooth moisture sealed flux has extremely good shelf life, and the flux is designed for exceptional cleansing on dirty steel and cast iron. As a general rule, preheat wide area to be welded to 700'F, and then the specific area to be welded to 1200'F prior to adding filler metal.

Download the product information .pdf for more details.

Amtec Product-29

Amtec 1005 FC 56% Flux Coated Silver Brazing

Amtec 1005 FC is a unique, ultra high purity 56% silver brazing alloy with a super active flux that contains twice the base metal cleansing action of conventional silver flux coated alloys. The flux coating is designed to be flexible and non-fragile and permits less odor than normal silver alloys. Amtec 1005 FC is the only silver solder with a flux that is strong enough to clean oxidized stainless steel. Because this alloy contains no cadmium, it is widely used on food and beverage handling equipment.

Download the product information .pdf for more details.

Amtec 1050 Nickel-Silver Build-Up

Amtec 1050 FC Nickel Silver Brazing

Amtec 1050 FC is a unique ultra high purity nickel silver alloy with a special flux coating that eliminates harsh chemical odors and the bright glare that conventional type nickel silver normally offers. It has a slick, smooth moisture sealed flux that has triple the life of normal products of the same type. The flux cleaning action is exceptional on dirty steels and cast irons. The difference with the 1050 FC is that is has the ability to build-up more than thin flow, so it is excellent for building up and overlaying of parts that need a wear resistant surface.

Download the product information .pdf for more details.

Amtec 1018FC Nickel Silver

Amtec 1018 FC Nickel Silver Brazing

Amtec 1018 FC is a unique ultra high purity nickel silver alloy with a special flux coating that eliminates harsh chemical odors and the bright glare that conventional type nickel silver normally offers. It has a slick, smooth moisture sealed flux that has triple the life of normal products of the same type. The flux cleaning action is exceptional on dirty steels and cast irons. This high strength joining alloy is used where thin flow joints are required.

Download the product information .pdf for more details.